Specification of Multi Camera Operated Portable Under Vehicle Inspection / Surveillance Systems as follows
1. Inspection Unit
The inspection unit (IU) should consist of a number of cameras for video capturing / scanning of the whole underside of all types of vehicles and to facilitate vehicle number plate recognition.
2. Observation Unit
- The Observation unit should not require holes in the ground or ramps to raise the vehicles.
- Colour camera unit assembly with LED lights array
Interface controller unit
- Data and power cables (10m)
Triggering Sensor/detector
- Receiving station (Desktop and laptop PC) comprising
Core2Duo or higher processor with 2GB RAM
320 GB HDD storage space for desk top and for laptop maximum available on international market or higher
- CD-RW drive with 19” LCD monitor
- UV Operating system – not requiring a hole in the ground and should not require eamps to raise the vehicle
3. Lighting
Life Long LED illumination
4. Cabling
Power and cabling to be provided
5. Connections
IP67 Connectors will be provided, Separate connectors to be provided for each function
6. Dimensions
- The equipment device shall be portable and should be able to accommodate small cars to heavy vehicles for inspection:
- Length (wheel base): to be mentioned
Height: to be mentioned
Width: to be mentioned
7. Installation.
To be mentioned with diagram, however, the item should be installed and dismantled easily
8. Camera
- Video (VGA) All camera will operate CCD technology – Graphic animation or better
- Illumination: LED Illumination lighting is acceptable for high sunlight conditions without shading
- Resolution: Min 470 TVL or min 4000 pixel
- Field of view 70 degrees of higher
- Frame rate: 25 frame or higher
- Operating Temp: 50 degrees C or higher
9. Environmental
IP 65 rated
Temp up to 50 degrees C
Humidity: 90% non condensing
10 Control Unit
- Mechanical Structure: One self contained module housing the following components:
- CPU: Brand with Intel Pentium CoreDuo2 or higher processor with speed 3.0GHz or higher (both desk top and laptop option)
- Detailed spec of desk to and laptop to be mentioned separately
- Image display – workable LCD monitor
Lighting controls – auto controls using software
- System power controls: – auto controls using software: Connectors for the IU: to be mentioned.
- The control unit should be a hinged lidded construction and should provide environmental protection
11. Power
220V SC – 50/60
12. Software
- The software for operating the system should contain the minimum features
- Automatic start and stop of image collection process
Whole full colour of under vehicle real time image to be displayed
- Real Time display is mandatory
- On line UPS in case of power failure
- Facility to scan each frame on its own or in groups across the width of the vehicle
- Image data to be corrected for angular distortion before display
- Facility to enter details of locations, operator and task information during the system start up process
- Display of the front face of the vehicle to sow the number plate
- Ability to operate with minimum vehicle speed
- Storage of images on internal hard disk
- Auto or manual storage of images with recovery by searching by licence of date/time
- Zoom – minimum 16 times ultra zoom
- Zoom images frame by frame of user selected areas of underside of vehicle
13. Quality
The UVS should be compliant with ISO standards.
14. Other Requirements:
Quotes Required in $USD including shipment to Bangladesh.
Quantity = 2 x full systems as described above.
COMPLETE TENDERS REQUIRED BY 10 FEBRUARY!
SUPPLIERS ABLE TO PROVIDE QUOTES ARE REQUESTED TO REPLY IN FIRST INSTANCE TO APRODEX, INCLUDING FOR VERIFICATION OF DETAILS AND / OR ADDITIONAL QUESTIONS